(626) 213-0054  |  Mon–Fri 8am–6pm PT  |  FREE SHIPPING
AEKONAMI — Protection You Can Trust.

Buyer's Guide

5–6 Mil vs. 6.5–7.5 Mil Black Nitrile Gloves: IF51 vs. IF63

Diamond Gloves IF51 and IF63 are both powder-free black nitrile examination gloves. The main specification separating these two models is their manufacturer-listed fingertip thickness: IF51 is listed at 5.0–6.0 mil, while IF63 is listed at 6.5–7.5 mil.

If you're comparing 5 mil or 6 mil black nitrile gloves for your business, use the full product specifications to understand what you're ordering. This guide compares the two models and explains what to check before choosing your case quantities.

A person holding two black nitrile gloves side by side for comparison.

Quick Answer

IF51: 5.0–6.0 mil fingertip thickness.

IF63: 6.5–7.5 mil fingertip thickness.

Both are black nitrile examination gloves with a finger-micro-textured surface, powder-free construction, and sizes S through XXL. Each case contains 1,000 gloves.

Choose according to your task requirements, fit, and the specific product documentation. The higher thickness range alone does not establish better protection for every job.

IF51 vs. IF63 at a glance

SpecificationIF51IF63
BrandDiamond GlovesDiamond Gloves
MaterialNitrileNitrile
ColorBlackBlack
ClassificationExaminationExamination
Fingertip thickness5.0–6.0 mil6.5–7.5 mil
SurfaceFinger micro-texturedFinger micro-textured
Powder statusPowder-freePowder-free
SterilityNon-sterileNon-sterile
FitAmbidextrousAmbidextrous
Available sizesS, M, L, XL, XXLS, M, L, XL, XXL
Gloves per box100100
Boxes per case1010
Gloves per case1,0001,000

Understanding the thickness difference

A mil is one-thousandth of an inch. Both ranges in this comparison refer to the fingertips, which makes the measurement location consistent.

IF63 has the higher listed fingertip-thickness range. That is useful when comparing the models, but it does not provide a complete picture of fit, feel, or performance.

Do not treat a shortened "5 mil" or "6 mil" listing as the complete specification. Check the model number, thickness range, and measurement location before ordering.

Our Disposable Glove Thickness Guide explains these measurements in more detail.

When to compare IF51

Start with IF51 when your purchasing requirements call for a black nitrile examination glove in the 5–6 mil fingertip range.

During evaluation, check whether the selected size allows comfortable finger movement and enough control for the work being performed. Pay attention to fit around the fingertips and palm, ease of putting the glove on, and comfort during the intended task.

If your team already uses IF51 successfully, review actual consumption by size before placing a larger order.

When to compare IF63

Consider IF63 when you want to evaluate a black nitrile examination glove with a higher listed fingertip thickness than IF51.

Compare it during the same representative tasks, using the appropriate size for each wearer. Check comfort, hand movement, handling of small items, and how often gloves need replacing during normal use.

Do not assume the thicker specification automatically means longer wear or better chemical protection. Those conclusions require product-specific evidence and an assessment of the task.

What stays the same between the models?

Both models have a finger-micro-textured surface. This comparison is between two micro-textured examination gloves; neither model is described here as a raised diamond-textured glove.

Both are also powder-free, non-sterile, and ambidextrous. They share the listed size range and case count. Because several specifications match, focus your comparison on the thickness requirement, fit during actual tasks, and current purchasing cost.

Compare delivered cost and actual usage

Both cases contain 1,000 gloves, so the basic price comparison is straightforward:

Delivered case cost ÷ 1,000 = delivered cost per glove

Then consider how your team uses each model. Record consumption by size and task, along with any fit-related waste or glove changes. Do not assume one model will reduce usage without evaluating it.

Check current prices and availability on the product pages rather than relying on an old quote. AEKONAMI sells both models by the case and offers free standard shipping within the contiguous United States.

For larger or recurring purchases, contact AEKONAMI about current pricing and availability.

Frequently asked questions

What is the main difference between IF51 and IF63?

Their listed fingertip thickness differs. IF51 is 5.0–6.0 mil; IF63 is 6.5–7.5 mil. Both are black nitrile examination gloves with finger-micro-textured surfaces.

Is IF63 exactly a 6 mil glove?

AEKONAMI lists IF63 at 6.5–7.5 mil fingertip thickness. Use the full specification when comparing it with products advertised simply as "6 mil."

Are both models examination gloves?

Yes. IF51 and IF63 are classified as examination gloves, and both are non-sterile.

Does IF63 have diamond texture?

IF63 is listed as finger micro-textured. IF51 also has a finger micro-textured surface. Neither model is described here as a raised diamond-textured glove.

Does a thicker glove provide better chemical protection?

Thickness alone does not establish chemical compatibility or protection. Review the specific glove's documentation and the requirements for the substances and tasks involved.

How many gloves are in each case?

Both models contain 1,000 gloves per case: 100 gloves per box and 10 boxes per case.

Do both models come in XXL?

Both are listed in sizes S, M, L, XL, and XXL. Confirm current size availability before ordering.

Choose the model that fits your requirements

Use IF51's 5.0–6.0 mil and IF63's 6.5–7.5 mil fingertip specifications as the starting point. Compare fit during representative tasks, review current case prices, and order the size mix your team needs.

For local purchasing considerations, read 5–6 Mil Black Nitrile Gloves in Los Angeles: IF51 Case Pricing and Sizes.